Hipro Noah Compatible Universal Fitting Hearing Aids Start Price USD 550.00 Current Price USD 550.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Sunday, November 09, 2008 End Time Tuesday, December 09, 2008 Location chicago, IL See more about 'Hipro Noah Compatible Universal Fitting Hearing Aids' Description YOU ARE LOOKING A BARELY USE  MADSEN UNIVERSAL HEARING FITTING DEVICES  GN Otometrics /  Madsen Electronics Hi-pro hearing aid programming device (see attached specs), that is used for programming hearing instruments. You could use it to program Phonak, GNResound, Siemens,  even Gennum's DSP hybrids, or any other digital instrument as long as you have their fitting software or development software tools. It works very well.Note/disclaimer:  This device has been tested with Phonak  iPFG Successware 2.0. we were able to fitting some BTE devices. since we don't have any other products from GNResound, Siemens or Gennums so we are not warranty that this Programmer will work with your device. Please consult with your Audiologist before buying products.Technical Specifications for HI-PRO Universal Hearing Instrument Programming Interface:PC InterfaceThe serial (COM) port is used for communication between an IBM or compatible PC and HI-PRO.Type: RS 232CConnector: 9-pole, D-range male (DTE)Baud rate: 1200 (default), 2400, 4800, 9600 or 19200 baudAlternatively, for connection to a PC with USB port only, we recommend the Belkin USB to Serial Adapter.Firmware Version: 2.31Power SupplyPower Requirements: AC 50/60 Hz115V (88V–132V) Fuse: T100mA L/250V230V (176V–264V) Fuse: T50mA L/250VVoltage range selector and fuses accessible from outside the cabinet.Power Consumption: Approx. 7 VAPatient SafetyComplies with EN 60601-1, Class I, type BF as well as with UL 544.Operating Environment Temperature: 5° – 40°C 41° – 104°FRelative Humidity: 30 – 90%Dimensions and WeightW x D x H: 50 x 188 x 50 mm6" x 7“ x 2"Net Weight: Approx. 2 lbsAccessories Included:everything in the picture Place a Bid!